<Mode
Change
During
Stopwatch
Measurement
Even when button© is pressed duringstopwatchmeasurement to switchthe
mode, the measurement continues. Byreturning tothe Chronographmode again,
the continued measurement can be displayed.
10.
Low
Battery
Warning
Function
When the service lifeof the battery approaches its end, the colon
(:)
on the
digital display
starts
flashing.
When
Analog 2 is
set
to indicate "Seconds",
the
Analog 2 dial movement
changes
to 2-second interval movement (moves by 2
increments every 2
seconds)
in the
case
of low battery.
In
these
cases,
replace
the
battery
as
soon
as
possible.
23
To Next Page
Loading...
