11
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2 Press the
button to select the “Search”, and press ENTER
button.
3 Press ENTER button at “Go To Zero Search” to start.
• AS soon as the counter searches 0:00:00 , the tape will play
automatically.
• The index signal is recorded on the tape automatically when
the recording is started. You can view a recording at a specific
start point by using this search feature.
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2 Press the button to select the “Search”, and press
ENTER button.
3 If your search is forward direction, highlight “Index
Search(+)” Index searching motion, then press ENTER button.
4 If your search is backward direction, highlight “Index
Search(-)” Index searching motion, then press ENTER button.
• Use this feature to search for a specific index number.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2 Press the button to select the “Search”, and press ENTER
button.
3 Press the button to select the “Index Number Search”,
and press ENTER button.
• If your search is forward direction, press up button to
select desired Index Number.
• If your search is reverse direction, press down button to
select desired Index Number.
4 After the correct index number is highlighted on the screen,
press the ENTER button to move to the specific index number
you have requested.
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2 Press the
button to select the “Search”, and press ENTER
button.
3 Press the button to select the “Counter Search”, and
press ENTER button.
4 Enter the desired time by pressing the numerical keys and
press ENTER button when you are finished entering the
correct time.
• The counter appears on screen and the LED display.
• To make changes to the time you have entered previously,
press the / buttons to go to the input field (hours, minutes
etc.) you want to change and use numerical buttons to update
the input fields.
Search Function
Search Counter
Search Index Forward/backward
Search Index Number
One-Touch Recording(OTR) allows you to record in 30-minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on “Recording”.
2 Activate OTR
While in Record mode, press the REC button again to activate One-Touch Recording(OTR).
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute increments up to 4 hours.
• The VCR&DVD PLAYER stops recording automatically when the time has elapsed.
4 Press button to stop recording mode.
Recording
(continued)
Search Counter Zero
One Touch timer Recording(OTR)
To Next Page
Loading...