Citizen C710 - Setting Digital Time

10
Using each function (mode)
* When watch is set to the summer time (ON).
e “SUM.” appears and the watch indicates time that is one hour ahead of
standard time.
<Setting digital time>
(1) Press button
Ⓑ
in normal time mode for more than 2 seconds. The “SUM.” and
“ON/OF” starts blinking to indicate that the watch enters time setting mode.
(2) Each time button
Ⓑ
is pressed in time setting mode, the blinking figures change
from the “SUM.” to “seconds”, “minutes”, “hours”, “12-hour/24-hour”, and to “SUM.”
again. Use button
Ⓑ
to select the figures you want to change.
(3) Adjust the blinking figures by pressing button
Ⓐ
. (If button
Ⓐ
is pressed
continuously, the figures change quickly.)
• The summer time display is switched ON/OF each time button
Ⓐ
is pressed.
• For resetting seconds, press button
Ⓐ
to restart from “00” second.
• The “12-hour/24-hour” indication system is switched alternately each time button
Ⓐ
is pressed.
(4) Press button
Ⓜ
to return the watch to normal time display.