Citizen CHUD514 - Insert the Batteries and AC Adapter; Time and Date Adjustment

- Eng 7 -
English
Español
Français Pyсский

7. INSERT THE BATTERIES AND AC ADAPTER
– USING BATTERIES –
(1) Remove the battery cover.
Place a nger on the hook, and pull the cover toward you to open.
(2) Insert the batteries.
Be sure to insert the batteries into the negative
side with the protruding
springs rst so as not to mix up the positive
and negative terminals.
(3) Close the battery cover.
Fit the lugs into the recesses and close the battery cover until you hear a click.
* When the battery icon
is displayed, or nothing appears in the display, replace
all 4 batteries with new ones at once.
* Do not use rechargeable and manganese (R6P) batteries.
* Adjust the time and date after changing the batteries.
* The data stored in the memory is not deleted by changing the batteries.
– USING AC ADAPTER –
(1) Insert the AC adapter plug into the AC adapter socket on the device.
This device can store measurement results together with the time and date
of measurement. The clock can be displayed all the time, which is useful for
remembering to take measurement at the same time every day for managing your
daily health.
1 Time and date
When you insert the batteries for the rst time,
“time and date” is displayed.
2 Month
Press and hold both the “
START/STOP”
button and the “
: memory” button for
approximately 2 seconds. The “month”
indicator begins ashing. Press the
button
to adjust the “month”. Press the button
repeatedly to increase the month value. Press
and hold the button to automatically cycle
through month values. Press the “
START/
STOP” button to conrm the month setting.
8. TIME AND DATE ADJUSTMENT
CHUD514_517_1802_ENES.indb 7 2018/12/05 9:34