Citizen CHUD514 - Measure Your Blood Pressure

- Eng 10 -

Pyсский Français Español
English
10. MEASURE YOUR BLOOD PRESSURE
1 Press the “ START/STOP” button to start measurement.
All digits are displayed. After all digits disappear, the last measurement result is
displayed. Then the cuff begins pressurizing automatically.
* If the device judges that pressurization is insufcient, it automatically
repressurize.
* The device automatically sets the pressure based on the previous
measurement. If previous user had a high blood pressure result, that high
pressure will automatically be used for the current measurement.
*
indicator will begin ashing when a pulse is detected.
* If you feel abnormal, or when you want to stop measurement, press “
START/STOP” button, then the cuff will deate and measurement stops.
2 The measurement result is displayed.
Once measurement is completed, the cuff deates and the
measurement result is displayed. If there is no error in the
measurement result, the device stores the result automatically.
3 Finishing measurement.
Press “
START/STOP” button to turn the device off or it will turn off
automatically after approximately 1 minute.
WHO blood pressure classication indicator
CHUD514_517_1802_ENES.indb 10 2018/12/05 9:34