Citizen CL-E300 User Manual

CITIZEN Android Label Print SDK — Programming Manual
45
2.2.28 StopOffset property
Syntax
int StopOffset
Attribute
Read/Write
Description
Specifies the distance between paper sensor and cutter or peeler to change the print stop position.
Note that the initial values are calculated to stop paper at an appropriate position. An insufficient
value truncates the printed label, an exceeded value truncates the next label.
Media handling
Inch system
Metric system
Initial
value
Minimum
value
Max
value
Initial
value
Minimum
value
Max
value
None
0000
0000
9999
0000
0000
9999
Cutter
0100
0254
Peel Off
0050
0127
Tear Off
0070
0178
*0.01 inches or 0.1 mm
Setter method
int setStopOffset (int stopOffset)
Returns CLS_SUCCESS (0) on success. See "2.1 Return value" for the error codes.
Getter method
int getStopOffset ()
Returns the set value. If nothing has been set, it returns CLS_PROPERTY_DEFAULT(999999).
Example
int stopOffset;
printer.setStopOffset(240);
stopOffset = printer.getStopOffset();

Citizen CL-E300 Specifications

General

Color	No
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Product color	Black
Ethernet LAN	Yes
RS-232 ports	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Flash memory	16 MB
Internal memory	32 MB
Media thickness	0.0635 - 0.254 mm
Maximum media length	4013 mm
Supported paper width	12.5 - 118 mm
LED indicators	Power, Status
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (printing)	60 W
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	208 mm
Width	170 mm
Height	152 mm
Weight	1980 g