24
——
1. Network transmission speed
Transmission speed LED (green)
100 Mbps Lit
10 Mbps/Not connected Unlit
2. Network status
Status LED (yellow)
Connected Lit
Not connected Unlit
Data transmission in
progress
Flashing
Changing network settings
You can use a web browser to access a special settings page to check and change
board settings.
Access the special settings page
1. Use a web browser to access the URL of the special settings page. Enter the IP ad-
dress assigned to the printer as the part of URL. (Example: For an IP address of
169.254.1.10, input: http://169.254.1.10.)
2. This displays the page to display the current status.
To Next Page
Loading...
