Need help?Do you have a question about the Citizen CTB-150 and is the answer not in the manual?
Guidelines for siting scales to maintain accuracy and avoid environmental factors.
Steps for assembling the pillar, platform, and indicator module for the CTB Series.
Detailed descriptions of the function and secondary functions of each key on the scale.
Explanation of symbols and labels shown on the scale's LCD display.
Procedures for zeroing, taring, and weighing a sample.
How to initiate and use the parts counting function.
Using check-weighing and accumulating weights for totals.
How to switch between net and gross weight display modes.
Guide on accessing and adjusting the scale's configurable parameters.
Explanation of audit trail counters for calibration and parameter changes.
Table of common problems, their potential causes, and recommended solutions.
Flowchart to diagnose and resolve issues when the display is blank.
Step-by-step guide for replacing the main circuit board.
Instructions for removing and installing a new load cell.
Procedure for replacing the Microprocessor Unit (MPU).
Detailed electronic schematic for the main components of the scale.
Electronic schematic illustrating the display unit and its connections.
Reference for numeric and alphabetic characters shown on the LCD screen.
To Next Page
General
