Need help?Do you have a question about the Citizen CY 510 and is the answer not in the manual?
Details safety precautions for operating the balance and preventing damage or injury.
Guidelines for protecting the balance during storage and transit to prevent damage.
Instructions for safely unpacking the balance and checking for any shipping damage.
Important warnings regarding balance operation in hazardous areas and voltage checks.
Diagram detailing the parts of CX/CY (0.1mg) and CT series balances.
Diagram detailing the parts of CY (1mg) series balances, with draft shield.
Diagram detailing the parts of CG series balances.
Diagram detailing the parts of CY (1mg) series balances, with wind shield.
Diagram detailing the parts of SSH series balances.
Instructions for installing draft or wind shields on the balance chamber.
Order of placing components like base plate and pan inside the balance chamber.
Procedure for placing the weighing pan on larger capacity balances.
Instructions for using the under-weighing hook and port.
Guidance on selecting the best position for balance accuracy and stability.
Environmental factors and locations to avoid for optimal balance performance.
Steps to level balances up to 10 kg using leveling feet and spirit level.
Procedure for leveling balances exceeding 10 kg capacity.
Precautions for connecting peripherals before powering the balance.
Recommended warm-up times for different balance models for accurate results.
Explanation of each key's function and the meaning of display symbols.
Steps for powering on the balance and the initialization process.
How the balance enters and exits standby mode after power on.
Overview of the basic weighing function and its capabilities.
Procedure for performing a basic weighing operation on the balance.
Steps for using the tare function to zero the balance with a container.
How to change the displayed unit of weight on the balance.
Explanation of printout formats for simple weighing with GLP ON/OFF.
Conditions requiring external calibration for accurate weighing results.
Step-by-step guide for performing external calibration using calibration weights.
Details of successful and unsuccessful external calibration reports.
Conditions requiring internal calibration for accurate weighing results.
Step-by-step guide for performing internal calibration using the balance's internal weight.
Details of successful and unsuccessful internal calibration reports.
Procedure for testing calibration by comparing actual vs. measured weights.
Information displayed in calibration test reports.
Steps to correct weighing results using a calibration test.
Details presented in the calibration test report.
Explains key operations for navigating user menu settings.
Configuration of units, stability filter, and calibration options in weighing mode.
Settings for Auto Zero Tracking, Baud Rate, Parity, Stop Bit, Print, GLP, Auto Off, Reset.
Overview of special functions like Piece Counting, Percent Weighing, Custom Unit.
Procedure for counting identical items using the balance.
Steps for performing percentage weighing against a preset value.
Analysis of changes in weight of samples, e.g., moisture content.
Steps to define and use a custom unit for weighing.
Procedures for manual and auto weighing of unstable samples like animals.
Procedures for summing individual weights manually or automatically.
Steps for checking samples against target and tolerance values.
Procedures for summing individual weighing pieces manually or automatically.
Steps for calculating density of samples using the balance.
Steps for calibrating pipettes using the balance.
Procedures for collecting, reading, and deleting statistical data.
Explains key operations for navigating parameter settings.
Setting identification and lot identification numbers.
Configuring the balance's time and date.
Configuring automatic calibration parameters like time and temperature.
Overview of the balance's interface for connecting to computers.
Explanation of data output characters, their positions, and examples.
Structure for sending commands to the balance and example commands.
Configuring Windows accessibility options for serial key communication.
Setting data units and separators for Windows communication.
Table listing common error codes, their causes, and solutions.
Importance of regular servicing by a CITIZEN technician and repair guidelines.
Instructions for safely cleaning the balance and its components.
Specific instructions for cleaning stainless steel parts of the balance.
When safe operation with the DC adapter is no longer assured.
Terms and conditions of the product warranty.
Form for registering the product warranty with the manufacturer.
Detailed dimensions for CX/CY (0.1mg), CT series analytical and carat balances.
Detailed dimensions for CY and CG series precision balances.
Detailed dimensions for SSH and CY series high capacity balances.
Technical specifications for CX and CY series analytical balances.
Technical specifications for CY and CG series precision balances.
Technical specifications for CG series top-loading precision balances.
Technical specifications for SSH series high capacity precision balances.
Technical specifications for CT series carat balances.
To Next Page
General
