Need help?Do you have a question about the Citizen CY 1003 and is the answer not in the manual?
General| Auto Power Off | Yes |
|---|---|
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Maximum Capacity | 100 kg |
| Minimum Capacity | 2 kg |
| Graduation | 0.1 kg |
Essential safety guidelines for operating the balance to prevent damage and injury.
Guidance on storage, unpacking, and the list of supplied accessories.
Detailed diagrams and labels for the layout of CX/CY, CT, CG, and SSH balance models.
Guidance on choosing an optimal, stable, and vibration-free location for accurate weighing.
Explains the necessary warm-up periods for the balance to ensure accurate results.
Detailed explanation of the function of each key on the balance control panel.
Step-by-step procedure for performing a simple weighing operation.
Instructions on how to tare the balance to measure net weight of samples.
Guide on how to switch between different weight units available on the balance.
Examples of printout formats for simple weighing operations with GLP ON/OFF.
Instructions on how to navigate and operate the balance's menu system.
Description of special applications and functions available within the balance menu.
Details on specific applications like Piece Counting, Percent Weighing, and Custom Units.
Detailed guide on using the piece counting function to count items by weight.
Setting custom reference percentages for percent weighing.
Setting display accuracy for custom unit weighing.
Configuring the Least Significant Digit (LSD) for custom unit weighing.
Procedure for manual animal weighing with countdown options.
How to perform automatic animal weighing with countdown and auto-start.
Procedure for manual formulation, summing weights with auto-printout.
Automatic formulation for summing weights efficiently with reduced manual steps.
Procedure for manual totalization, summing weights with auto-printout.
Automatic totalization for summing weights efficiently with reduced manual steps.
Setting the liquid temperature for density determination.
Selecting the type of liquid (water, ethanol, other) for density measurement.
Choosing the mode (compensated, uncompensated, gold purity) for density results.
Setting the number of calibration cycles for pipette calibration.
Configuring temperature settings for pipette calibration.
Setting pressure values for pipette calibration.
Setting identification and Lot identification numbers.
Configuring the balance's internal clock and date.
Configuration of automatic calibration triggers based on time, temperature, or power-on.
Setting the time intervals for automatic calibration.
Configuring temperature thresholds for automatic calibration.
Description of data output formats and character codes.
Command formats for controlling the balance via a computer interface.
To Next Page
