Need help?Do you have a question about the Citizen CY 204 and is the answer not in the manual?
Essential safety guidelines for operating the balance and its electrical components.
Optimal placement advice for accurate weighing and stable operation.
Ensuring the balance reaches operating temperature for precise measurements.
Explanation of control keys and display symbols for balance operation.
Describes the balance's startup process and entering standby mode.
Step-by-step guide for performing basic weighing and tarring.
How to change the active weight units displayed on the balance.
Steps for calibrating the balance using external weights for accuracy.
Guide to performing automatic calibration using the balance's internal weight.
How to verify calibration accuracy by comparing actual and measured weights.
Using the TARE key to correct results after a calibration test.
Instructions for selecting and storing menu functions.
Introduction to built-in applications like Piece Counting and Percent Weighing.
How to count items accurately using the balance.
Weighing to a preset value or determining percentage deviations.
Defining and using custom units for specific weighing applications.
Using manual and automatic modes for weighing unstable samples.
Summing individual weighing values manually or automatically.
Configuring target values and tolerance limits for check weighing.
Steps for determining the density of solids using liquid and temperature settings.
Guidelines for calibrating pipettes for accurate liquid measurements.
How to retrieve and interpret stored weighing data statistics.
Instructions for setting the current time and date on the balance.
How to set identification and lot identification numbers.
Setting up automatic calibration based on time, temperature, or power-on.
Enabling data transfer from balance to PC applications.
Information on printout parameters for compliance with ISO/GLP standards.
Details on the balance's data output format and character codes.
How to send commands to the balance from a computer.
Schematic for connecting the balance to a computer via RS-232.
Troubleshooting common error messages and their resolutions.
Guidelines for cleaning, maintaining, and servicing the balance.
Details on warranty coverage, limitations, and claim procedures.
Information and form for registering the product warranty.
Technical drawings showing the physical dimensions of various balance models.
Technical data including capacity, readability, and calibration for analytical balances.
List of optional accessories like printers, remote displays, and kits.
To Next Page
General
