Need help?Do you have a question about the Citizen CX 265 and is the answer not in the manual?
General| Auto Power Off | Yes |
|---|---|
| Tare Function | Yes |
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Power Source | Battery or AC adapter |
Environmental and placement requirements for balance operation.
Procedure for leveling the balance for accurate readings.
Time required for the balance to stabilize after power-on.
Explanation of the balance's graphical display elements.
Details of the balance's control keyboard functions.
Ports and connectors available on the balance.
Navigating through the balance's user menu system.
Overview of options and structure within the user menu.
Procedure for calibrating pipettes using the balance.
Enabling operator login and password protection.
Process for automatic internal calibration.
Performing and interpreting calibration tests.
Steps for manual calibration procedures.
Generating and printing calibration reports.
Adjusting the balance's response filter for stability.
Configuring output stability settings for weighing results.
Setting the display refresh rate.
Enabling and configuring the autozero function.
Controlling the display of the last digit.
Function for displaying negative values.
Unique identifier for printouts.
Control for automatic printout of ID codes.
Beep signal for key presses.
Selection of interface language.
Control for display backlight.
Adjustment of display contrast.
Automatic display dimming function.
Display of internal temperature.
Balance factory number information.
Balance program number information.
Printing balance parameters from user menu.
Receiving balance parameters via RS 232.
Setting password for administrator and user access.
Balance function for counting identical items by piece.
Performing checkweighing operations with tolerance limits.
Using the balance for dispensing and filling operations.
Calculating and displaying results as percentages.
Specific mode for weighing animals.
Measuring density of solids and liquids.
Creating mixtures based on recipes.
Performing statistical analysis of measurements.
Calibrating pipettes using the balance.
Basic printout including weighing results and GLP variables.
Creating custom printouts with user-defined text and variables.
Diagrams and pinouts for connecting to printers and computers.
To Next Page
