Citizen E650 - Page 25

48
49
4. Press and release the lower right button (A) .
The function hand (2:00 position) moves slightly.
5. Rotate the crown to align the date indicator
to the middle between 31st and 1st.
The function hand (2:00 position) and the
date indicator move synchronously.
6. Rotate the crown to align the
function hand to the 30 minute
position of the chronograph.
• The function hand and the date indicator
move synchronously. After adjusting the
function hand, confirm that the date indicator
comes to the middle between 31st and 1st.
• You may activate the rapid advance feature
by quickly rotating the crown several "clicks".
To stop the rapid advance feature, rotate the
crown one click in either direction.
7. Press and release the lower right button (A).
The hour and minute hands move slightly.
0 1 2
Checking and correcting the current reference (0) position
8. Rotate the crown to align the
hour and minute hands to 0
hour, 0-minute and the 24-
hour hand to '24' (straight up).
• You may activate the rapid advance
feature by quickly rotating the crown
several "clicks". To stop the rapid
advance feature, rotate the crown one
click in either direction.
9. Press and release the lower right button (A).
The second hands moves slightly.
10.Rotate the crown to align the second hand to 0 second.
• You may activate the rapid advance feature by quickly rotating the crown several
"clicks". To stop the rapid advance feature, rotate the crown one click in either direction.
11.Return the crown to position
0
to complete the (0) positioning.
• In the chronograph mode, radio signal cannot be received.
• After checking or correcting the reference positions, set the mode hand to a city or
A-TM to resume the time display mode.
Checking and correcting the current reference (0) position
Function hand
Minute hand
Hour hand
Button (A)
0 1 2
Function hand
Hour/minute/
second hands
24 hour hand
Button (A)