25
Checking the power reserve and power generation amount
Checking the power reserve
1
Change the mode to [
TME
] or [
UTC
] and push the
crown in to position
.
2
Press and release the upper right button .
The function hand indicates the power reserve in levels (page
26
) and the second hand indicates the current time zone
setting of the home time.
• The power reserve level is always shown in the [
LLI
] mode.
3
Press and release the upper right button to finish
the procedure.
The second hand returns to indicate the seconds.
• The hand returns automatically in 10 seconds without
pressing the button.
To Next Page
Loading...
