28
Checking the power reserve and power generation amount
Checking power generation amount (Light-Level Indicator)
1
Change the mode to [
LLI
] and push the crown in to
position
.
The function hand indicates the power reserve in levels (page
26
).
2
Press and release the upper right button .
The second hand indicates power generation amount in
levels (page
29
).
• Power generation amount is measured in 1-second interval
and indicated in levels.
3
Press and release the upper right button to finish
the procedure.
The second hand returns to indicate the seconds.
• The hand returns automatically in 30 seconds without
pressing the button.
To Next Page
Loading...
