21
English
3. Press button A to measure lap times.
Each time you press button A, the lap time
and its number (“01” to “99”) are displayed
for 7 seconds, then the speed for three
seconds.
• The maximum speed displayed is “999.” I f
the speed is beyond 999, “---” is displayed.
4. Press button B to stop the measurement.
Following records are displayed: lap time and its number, speed, and the total of
elapsed time.
• To restart the measurement, press button B again.
• To reset the measurement time, press button A while the measurement is
stopped.
To check the records
Change the mode to Lap Record. (→page 22)
Lap number “KMh” or “MPH”
(The unit is different
depending on
models.)
To Next Page
Loading...
