42
Caution
If you reset the watch, the indication of
each mode changes as the table on the
right and the records in the Lap Record
mode are deleted.
1.
Pull out
the crown
to position
1
.
2. Press buttons A, B
and M simultaneously.
The confirmation tone
sounds and “0” is displayed.
3. Correct the reference position.
Follow step 3 to step 5 on page 40.
Crown
Button A
Button B
Button M
Resetting the watch
The watch may not work properly if it is affected by static electricity or shock. In this
case, reset the watch.
To Next Page
Loading...
