________________________________________________________
71
Troubleshooting
_________________________________________________________________
Problem: Paper does not feed.
√ Is your continuous paper set in the tractor feeders correctly?
√ Be sure the paper select lever is in the correct position.
Problem: Paper parking does not operate or paper doesn't advance to the tear-
off position.
√ The paper select lever must be set for continuous paper
{forward position} to park the paper.
√ Check the tractor. It must be in the push position.
√ Be sure the printer is off line.
Problem: Tear-off position is not at the perforation.
√ Check the length of your paper against the setting made with the
VuePrint menu. They must match.
√ Be sure the A.S.F. selection {either the VuePrint menu or in the
INSTALL menu} is off if the automatic sheet feeder is not
installed.
√ Perhaps you turned the paper feed knob manually, which should
not be done.
√ Try parking the paper again.
To Next Page
Loading...
