Citizen H144 - Resetting the Watch; Resetting Procedure and Caution

4646
The watch may not work properly if it is affected by static
electricity or shock. In this case, you must reset the watch.
Caution
• Be sure to charge the watch fully before resetting it. (Page
32
)
• You must correct the current reference (0) position after
resetting the watch.
1. Pull the crown out to position .
2. Press the upper and lower right buttons
A
and
B
, then release them.
The second hand moves to the “0” second position, the
hour hand and date indicator move slightly, and the
watch is now reset.
3. Correct the current reference (0) position.
See from step 4 on page
40
.
Resetting the watch


Crown position