Citizen H144 - Post-Reset Watch Setup Procedures; Selecting City and Adjusting Time;Calendar

47
After resetting the watch
You must set the watch again following the procedure below.
1. Select a city.
See pages
10
to
13
.
• After resetting the watch, the standard time is shown for all cities (the watch
automatically switches between Daylight Saving Time and standard time in
accordance with the Daylight Saving Time check signal). For Daylight Saving
Time, see pages
24
to
29
.
2. Adjust the time/calendar.
• When adjusting by receiving the time signal manually:
See pages
22
and
23
.
• When adjusting manually:
See pages
34
to
37
.