16
Checking the power reserve
1. Ensure that the crown is in position .
2. Press the lower right button
briefly.
The second hand moves to indicate the power reserve.
The second hand
indicates “OK” or “NO”
The watch is sufficiently
charged.
The second hand rotates
counterclockwise, then
indicates “OK” or “NO”
The charge of the watch is low.
Charge the watch. See pages
10
to
15
.
• “OK” and “NO” indicate the reception result of the
time signal and no relationship to the power reserve.
3. Press the lower right button briefly to finish the
procedure.
The current time is indicated.
• The current time will be indicated automatically after
10 seconds even without pressing the button.
To Next Page
Loading...
