6) Check that the dot display is not alternating between dot display and
"CHEK"(D201/D207)/ "ERR"(D202/D208) display. Ifso, then you should
check
the
water
sensor.
-•Consult various
other
warning functions for counteraction
needed.
7) Comfirmthe alarm sound by operationg the alarm
monitor.
•
Change
tothe
alarm
mode
by
pressing
(jvj)
button.
• Alarm monitor is activated while pressing (A) button.
At
the
same
time
the
alarm
will
be
switched
ON/OFF.
3.
Points
to
notice
while
diving
a.
There
are times when the alarm sound is not easily
heard:
when
underwater,
when
being carry,
and
in
othe
outside
environment.
b.
Accurate
water
temperature
is
most
likely to be indicate
after 1 to 3 minutes from the
start
of your dive.
c.
When
various warning functions are operating,
please
heed
the warning.
d. Be careful not to
knock
the
watch
against
hard
objects
like diving
equipment
or rocks, etc.
16
To Next Page
Loading...
