4.
What
to
do
after-diving
-
-—
—
——
a.
Wash
and rinse off any
sea
water, mud, sand, and
such
like, present on the watch,
- with fresh water.
Then
dry any moisture completely, with a dry cloth, etc.
b. Treat the
sensor
carefully. Do not remove the
cover
or
use
sharp objects to clean dirt
or dust fromjt. Ifany dirtgets intothe sensor,wash itwith clean water;ifthat doesn't
remove
the dirt, please
take
the watch to the nearest Citizen Service
Center.
Also
when
washing, if a strong jet of water hits the sensor; or if it is
pressed
with a
hand, it
may
change
to the diving mode. So
take
care.
c. Do not
expose
the
watch to chemicals.
d. For information about basic care for this watch, please look atT. [Forlong usage].
17
To Next Page
Loading...
