iDP3550/3551 User’s Manual
17
CITIZEN
4.9 How to Remove Remaining Paper
4.9.1 Paper roll
1. Detach the printer cover.
2. Open the auto cutter. (iDP3551)
3. Remove the paper by pulling it in the direction in which it is normally guided.
4. Close the auto cutter. (iDP3551)
5. Attach the printer cover.
CAUTION : • When removing the paper, do not pull the paper from the paper inlet. (Do not remove the
paper in the reverseed direction.)
• When closing the auto cutter, do so gently not to give a shock.
4.9.2 Fan-Fold paper
1. Detach the printer cover.
2. While turning the knob in the direction indicated by the arrow, pull out the fan-fold paper in the
direction shown in the drawing.
To Next Page
Loading...
