To Next PageTo Next PageWhy has my Citizen JY8033-51E Watch stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen JY8033-51E Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen JY8033-51E moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
Explains the watch's ability to receive standard time radio waves for automatic time correction.
Guides on verifying the second hand's movement to ensure proper watch operation.
Instructs how to confirm the watch's radio wave reception status.
Instructions for checking the watch's current battery charge level.
Procedure for setting the user's current city as the home city for accurate timekeeping.
Steps to manually set the watch's home time or synchronize it via radio waves.
Details on configuring the first digital display for world time or other functions.
Describes the watch's automatic daily reception of radio waves for time synchronization.
Provides guidance on the optimal conditions and methods for receiving radio signals.
Explains how to manually initiate radio wave reception at any time.
Details the watch's automatic reception process after a period of insufficient charge.
Illustrates the watch display status while waiting for radio wave reception.
Shows how the watch display changes during the radio wave reception process.
Depicts the watch display status after successful radio wave reception.
Lists cities and their corresponding standard time radio wave transmitters.
Details the assignment of radio wave transmitters (JJY, WWVB, DCF77, BPC) to regions.
Explains how to interpret the four grades of the watch's charge level indicator.
Lists and illustrates the different operational modes of the watch.
Guides on swapping the displayed home time and world time for travel convenience.
Defines daylight saving time and its regional variations.
Details automatic and manual methods for setting daylight saving time.
Step-by-step instructions for manually setting the watch time via the digital display.
Procedure for manually setting the watch's date and year through the digital display.
Instructions on setting the countdown timer, from 1 minute up to 99 minutes.
Explains how to start, stop, and reset the timer, including flyback functionality.
Details on operating the chronograph for time measurement up to 24 hours.
Guides on setting daylight saving time and choosing which cities to display.
Instructions for setting custom time differences for the Home city (HOM).
Procedure for setting the daily alarm time for specific cities.
Option to automatically update daylight saving time based on received radio waves.
Configuration of the watch's automatic radio wave reception schedule.
Step-by-step guide for configuring daylight saving time and automatic reception settings.
Details the default settings restored after a watch reset operation.
Provides instructions for resetting the watch to its initial factory settings.
Describes functions available in Model 1, like elapsed time measurement.
Explains how to use the crown to rotate the slide rule bezel for calculations.
Guides on using the slide rule bezel to estimate elapsed time duration.
Instructions for using the slide rule bezel to determine remaining time.
Demonstrates how to perform multiplication using the watch's slide rule.
Illustrates the process of performing division with the slide rule bezel.
Explains how to read ratios and solve proportional problems using the slide rule.
Guides on calculating square roots using the watch's slide rule functions.
Provides advice on maintaining optimal performance through proper charging.
Details how the watch conserves power when not exposed to light.
Explains the indicators and behavior when the watch battery is low.
Describes the mechanism that prevents the battery from overcharging.
Provides a table of charging times based on light exposure and environment.
Important warnings regarding the safe removal and disposal of the secondary battery.
Safety guidelines to follow during the watch charging process to prevent damage.
Details different water resistance levels and their suitable usage scenarios.
Advice on cleaning the watch to maintain its appearance and functionality.
Guidelines on environmental conditions to avoid for optimal watch operation.
Lists the functions and displays shown in the analog part of the watch face.
Details the functions and information displayed in the digital segments of the watch.
Lists various extra functionalities and features of the watch.
Information on the watch's battery life and operating duration under different conditions.
Specifies the type of battery used in the watch.
General