To Next PageTo Next PageWhy has my Citizen JY8035-04E stopped working?
If your Citizen watch has stopped, the charge level indicator might be at level 0. To resolve this, charge the watch sufficiently until the charge level indicator reaches level 3, as indicated in 'Guide to Charging Time'.
What to do if the hands or digital displays on my Citizen JY8035-04E Watch are abnormal?
If your Citizen watch hands or digital displays are acting abnormally, try resetting the watch.
Why is the second hand on my Citizen Watch moving in 2-second intervals?
If the second hand on your Citizen watch is moving in 2-second intervals, it could indicate a low charge. Charge the watch sufficiently until the charge level indicator reaches the fully charged level. Alternatively, 'ERR' might be displayed in digital display 1, in this case you should reset the watch and then correct the reference position.
General| Brand | Citizen |
|---|---|
| Model | JY8035-04E |
| Movement | Eco-Drive |
| Water Resistance | 200 meters |
| Case Material | Stainless Steel |
| Dial Color | Black |
| Band Material | Stainless Steel |
| Case Thickness | 12 mm |
| Crystal | Sapphire |
| Features | Chronograph |
| Calendar | Perpetual |
Receives standard time radio waves to automatically correct time and date.
Verify watch hands are aligned with '0' for accurate timekeeping.
Steps to set home city, home time, and digital display 1.
Details on different methods for receiving radio signals.
Identifies locations and conditions that hinder radio signal reception.
Explains how the watch displays status during reception standby and signal receiving.
Check radio wave reception results and daylight saving time status.
Details on transmitters in Japan, USA, Europe, and China for radio wave reception.
View UTC time and 43 registered cities, plus one additional custom city.
Visual guide to understanding the four grades of the secondary battery charge level.
Step-by-step guide to align the mode hand with the desired watch mode.
Procedure to easily display destination home time by switching with world time.
Options to activate/deactivate DST automatically or manually set it.
Manually adjust time, DST, and 12/24hr format in regions without radio waves.
Manually set the year, month, and date in regions without radio waves.
Configure, start, stop, and reset the timer for countdown measurements.
Measure elapsed time up to 24 hours with split time functionality.
Configure daylight saving time for cities and select cities to display.
Set custom time differences for the HOM city in 15-minute intervals.
Set alarms for specific city times, with daily sound for 15 seconds.
Choose to update time with DST from received radio waves.
Configure conditions for automatic reception (MAN, OFF, AUT).
Turn on LED lights for digital displays 1 and 2 for three seconds.
Steps to reset the watch and return all settings to their initial states.
Detailed guide to adjusting charge level indicator and hands to reference positions.
Use the slide rule bezel to estimate elapsed time by aligning marks.
Estimate time remaining until a target time using the slide rule bezel.
Utilize the bezel for calculations like time, speed, distance, and fuel consumption.
Tips for optimal watch performance by storing and charging in bright locations.
How the watch conserves power by stopping displays and hands when not exposed to light.
Indicates low charge with 2-second hand movement and flashing marks.
Function that automatically stops charging when the battery is full.
Table showing approximate charging times based on illuminance and environment.
Safety warnings and precautions for handling the secondary battery and charging.
Solutions for problems related to receiving radio signals, such as location or noise.
Troubleshooting incorrect time, sudden hand movement, or reception status.
Resolving problems like a stopped watch, 2-second movement, or non-operation after charging.
Details on water resistance levels and examples of use for different ratings.
Guidelines for operating temperature, magnetic fields, static electricity, and cleaning.
Technical details including accuracy, temperature range, and display functions.
Comprehensive list of all functions such as signal reception, alarms, and chronograph.
