24 25
<Time required for reception>
Reception can take from about 2 minutes to a
maximum of 15 minutes, depending on factors such
as the weather or noise. If the radio wave reception
fails, the watch may return immediately to the
normal display.
[Caution] During reception, the second hand may
rotate once and show the reception level
again.
Do not move the watch until the second
hand has returned to 1-second interval
movement.
WW
6. Display during Reception
[During reception standby]
j Second hand moves to RX and
stops.
The radio wave reception
indicator points to the received
transmitter.
[Digital display]
[Second hand display]
Off Off
j If the reception fails, RC and
NO are displayed.
Repeatedly switches
between on and off
j The second hand moves from
RX to reception level H, M or L
and reception starts.
j When the reception is
successful, the second hand
will return to 1-second interval
movement and the other hands
will be automatically corrected.
[Receiving signal]
[Reception completed]
Radio wave
reception
indicator
To Next Page
Loading...
