Page 13
Proximity FAQ
57) How do I delete a previously paired Proximity
watch from my compatible iPhone®?
"is is done through Bluetooth® settings on your
iPhone®.
If you have an iPhone® 4S operating on iOS 5:
o
Tap on ‘Settings’.
o
Tap on ‘General’.
o
Tap on Bluetooth®. If the Bluetooth® setting is
‘OFF’,
turn to ‘ON.’
o
Tap the arrow next to ‘Bluetooth®’.
Find the "Eco-Drive..." designation
o
Tap on the arrow then
o Tap on ‘Forget this Device’
If you have an iPhone® 4S operating on iOS 6 or
have an iPhone® 5 or higher
o
Tap on settings.
o
Tap on Bluetooth®.
If the Bluetooth® setting is ‘OFF’, turn to ‘ON.’
o Find the "Eco-Drive.." designation
o
Tap on the arrow.
o
Tap on Forget this Device.
58) How do I disconnect the Bluetooth® connection
between my Proximity watch and my iPhone®?
You may do this in several ways:
o
Pull the crown out one ‘click’ rotate the crown to
move the mode had at the 6:00 sub dial so that it is
pointing to disconnect (DCT). Push the crown in
one click. is will initiate the “disconnect”
sequence. Be sure to return the mode hand to the
time (TME) mode.
o
You may also open the Proximity App on your
iPhone® and turn the ‘Proximity Connect’ feature to
‘OFF.’ en you will need to turn ‘SCAN’ o as well.
o
Turn your iPhone® settings to Airplane mode.
o
Turn the Bluetooth® radio on your iPhone® to
‘OFF’.
o
When you power down your iPhone®, the
Bluetooth® connection is automatically cancelled.
To Next Page
Loading...
Need help?
General
