4) e Bluetooth® screen is shown. Be sure Bluetooth® is turned on. Note: you may have other devices showing
in this screen:
7) Push back in one click. is activates the pairing process. Your Eco-Drive Proximity device will show in the
iPhone® Bluetooth® devices with a status of ‘not paired’ to the right:
8) Tap on ‘Eco-Drive Proximity’. A pairing request will be presented. Tap on ‘Pair’:
9) Upon successful pairing, the Eco-Drive Proximity device status will change to ‘Connected’:
10) Tap on ‘Settings’ at the top le of the screen:
11) Press and release the home button on your iPhone® to return to your iPhone® home screen.
e sub-dial hand at the 2:00 position on your Proximity watch will
rotate to reect the Bluetooth® connected power reserve level:
Pairing your Proximity Watch with your iPhone® (cont’d)
continued next page
6) Pull the crown out one click and rotate the crown to move the mode hand to ‘PR’ mode:
3) Tap on Bluetooth®:
page 9
To Next Page
Loading...
