5
Checking the smartphone
Check whether Bluetooth is turned on on your smartphone.
6
Registering
1
Change the mode to [
TME
] or [
L-TM
] and push the crown in
to position 0.
2
Start the dedicated app.
• Keep the screen of the app shown.
• Agree when a dialog appears to request your permission to use
Bluetooth connection.
3
Press and release the upper right button B.
The second hand points “
ACT
(40-second position)” and
registration starts.
• The smartphone is connected when it has already been registered.
4
“
Connected
” appears as registration is finished.
• It may take about 20 - 30 seconds to finish registration.
The watch and the smartphone are connected as registration is
finished. The function hand of the watch points “
ON
” of connection
status and the second hand returns to normal movement.
When registration failed, remove all the registration information
and try registration again following “Removing all the registration
information and trying pairing (registration) again”.
CITIZEN Bluetooth Watch W770 Troubleshooting
Video
To Next Page
Loading...
