Citizen Watch - Checking the Power Reserve

19
English
Charging your watch
◆
Checking the power reserve
Checking the current power reserve.
1. Ensure that the crown is in position
0
.
2. Press and release the lower right button
Ⓐ
.
The function hand shows the power reserve level.
• Fordetailsofthepowerreservelevelindication,
refer to the next page.
3. Press and release the lower right button
Ⓐ
to finish the check procedure.
• Normaloperationwillresumeifthebuttonisnot
pressed for approx. 10 seconds.
Ⓐ
0 1 2