Citrix ADC MPX
about the firmware upgrade.
The fortville_nic_info script can be invoked to print an informational summary about the
Fortville NICs in the host ADC appliance. The information is recorded in the log file.
To run the script, at the command prompt, type:
1 > shell
2 root@ns# cd /var/tmp/Fortville_Silicom_Intel/scripts
3 root@ns# sh fortville_nic_info
4
5 <!--NeedCopy-->
Wiping your data before sending the ADC appliance to Citrix
September 19, 2022
The configuration wipe scripts remove all customer proprietary information from a Citrix ADC appli‑
ance before Return Merchandise Authorization (RMA) or return from evaluation. The scripts are de‑
signed to give the customer a high level of confidence that all their information has been removed.
Caution: Running these scripts is dangerous. If something goes wrong during execution, the appli‑
ance might be rendered unbootable and Citrix might have to reinstall the soware image. The config
wipe scripts remove everything on the box, including licenses, configuration, images, and scripts. Run
these scripts only aer understanding the consequences.
Supported Platforms
The script is supported on all Citrix ADC MPX appliances. The script is not supported on Citrix ADC SDX
appliances. Delete the VPX instances before returning the SDX appliance.
Required script files
The following script files must be present in the /flash/.recovery directory. They are required for suc‑
cessfully wiping out the data.
• rc.conf_wipe_subr
• rc.flash_wipe_recover
• rc.local_disk_wipe_2
• rc.local_flash_wipe_1
• rc.main_disk_wipe
• rc.main_flash_wipe
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 209
To Next Page
Loading...
Need help?
General
