Practical information
98
1. 12 V compressor with integral pressure
gauge, to measure and adjust the tyre
pressure.
Composition of the kit
2. Sealant cartridge for the temporary repair
of a tyre.
3. Injection pipe.
4. Suction pipe, to remove the sealant product
if necessary.
5. Sachet containing a replacement valve
core, a tool for removing/refitting the valve
core and a speed restriction sticker.
The speed restriction sticker must be
affixed to the vehicle's steering wheel to
remind you that a wheel is in temporary
use.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre
repaired using this type of kit.
Retting the rear seat cushion
F Put the metal cover back into place.
F Refit the four "butterfly" screws.
F Insert the metal hooks into the seat
backrest.
F Fold the seat cushion down until it locks
in place.
When refitting the cushion, take care
not to trap the seat belt buckles.
To Next Page
Loading...
