8
Practical information
99
Repair procedure
1. Sealing
F Switch off the ignition.
F Indicate on the speed restriction sticker
provided, the wheel to be repaired, then fix
it to the steering wheel as a reminder that a
wheel is in temporary use.
F Shake the sealant cartridge, remove the
cap and screw on the injection pipe.
F Remove the valve cap for the tyre to be
repaired.
F Remove the valve core using the tool
provided, and store in in a clean place.
F Connect the injection pipe to the valve of
the tyre to be repaired.
F Tap the sealant cartridge (top down)
several times with your hand, so as to
inject all of the product into the tyre.
F Remove the injection pipe.
F Refit the valve core and tighten it using the
tool provided.
Take care, this product is harmful (e.g. ethylene-glycol, colophony...) if swallowed and
causes irritation to the eyes.
Keep it out of reach of children.
The use-by date of the sealant is marked on the cartridge.
After use, do not discard the empty cartridge but take it to a CITROËN dealer (France) or an
authorised waste disposal site.
Don't forget to obtain a replacement cartridge; they are available from a CITROËN dealer or
a qualified workshop.
Avoid removing any foreign bodies
which have penetrated into the tyre.
To Next Page
Loading...
