EasyManua.ls Logo

CITROEN C Zero - Control Unit

CITROEN C Zero
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Practical information
87
Control unit
There are four indicator lamps:
- STOP: on red.
It indicates that charging has been
interrupted by a press on the Manual Stop
button. This action is essential before
disconnecting the charging cable from the
power point when charging.
- POWER: on green.
It indicates that the electric connection has
been established. If it does not come on,
check that the connections are correct. If
the problem persists, contact a CITROËN
dealer or a qualified workshop.
- FAULT: on red.
It indicates the presence of a fault. Check
that the connections are correct. If this
warning lamp does not go off, contact a
CITROËN dealer or a qualified workshop.
- CHARGING: on green.
It indicates that charging is in progress.
If it does not come on, check that the
connections are correct. If the problem
persists, contact a CITROËN dealer or a
qualified workshop.
This type of control unit that has a system for
recognising the type of power point (depending
on country). It detects the power rating of your
domestic power point and is able to support
and select the best current rating to ensure
safe charging:
- 14 A (FAST): if your electrical installation
supports it.
- 8 A (NORMAL): if your electrical
installation is standard.

Table of Contents

Other manuals for CITROEN C Zero

Related product manuals