CITROEN C Zero - Page 149

04
147
USING THE TELEPHONE
A virtual keypad is displayed on the screen: choose
a 4 digit code then conrm with OK.
A message is displayed on the screen of the
telephone: enter the same code and conrm.
A message appears in the screen to conrm the result of the
connection.
Pairing can also be initiated from the telephone by searching for
detected Bluetooth devices.
Accept the connection to the telephone.
If pairing fails, try again; the number of attempts is not limited.
The directory and the calls list can be accessed after the
synchronisation period (if the telephone is compatible).
Automatic connection must be congured in the telephone to allow
the connection each time the vehicle is started.
In some cases, the Bluetooth address of the telephone may appear
instead of the name of the telephone.