166
Bluetooth® audio system
connect / disconnect the telephone (hands-free
kit and streaming).
– "Delete connection": to delete the pairing.
When you delete a pairing in the system,
remember to delete it from your
telephone as well.
Press OK to conrm.
Receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen.
Select the "YES" tab in the screen using
the buttons.
Conrm with OK.
Press this button at the steering mounted
controls to accept the call.
Making a call
In the "Telephone" menu.
Select "Call".
Select "Dial".
Or
Select "Directory".
Or
Select "Calls list".
Conrm with OK.
The services available depend on the
network, the SIM card and the
compatibility of the Bluetooth telephone used.
Check the instructions for your telephone and
with your service provider for the services to
which you have access.
Procedure from the telephone
Select the name of the system in the list
of devices detected.
Procedure from the system
Press the MENU button.
Select "Connections".
Conrm with OK.
Select "Search for a device".
Conrm with OK.
A window is displayed with a search in progress
message.
In the list of devices detected, select a telephone
to pair. Only one telephone can be paired at a
time.
Completing the pairing
To complete the pairing, whichever
procedure is used (from the telephone or
from the system), ensure that the code is the
same in the system and in the telephone.
If pairing fails, the number of attempts is not
restricted.
A message appears in the screen conrming the
pairing.
Information and advice
The "Telephone" menu gives access to the
following functions in particular: "Directory", if
your telephone equipment is fully compatible,
"Call log", "View paired devices".
Depending on the type of telephone, you may be
asked to accept or conrm access by the system
to each of these functions.
Go to the Brand's website for more
information (compatibility, more help,
etc.).
Managing connections
The telephone connection automatically
includes hands free operation and audio
streaming.
The ability of the system to connect to just
one prole depends on the telephone. Both
proles may connect by default.
Press the MENU button.
Select "Connections".
Press OK to conrm.
Select "Bluetooth Connections
management" and conrm. The list of
paired telephones is displayed.
Press OK to conrm.
Indicates that a device is connected.
A number indicates the prole of the
connection with the system:
– 1 for media or 1 for telephone.
– 2 for media and telephone.
Indicates connection of the audio
steaming prole.
Indicates connection of the hands-free
telephone prole.
Select a telephone.
Press OK to conrm.
Then select and conrm:
– "Connect telephone" / "Disconnect
telephone" : to connect / disconnect the
telephone or the hands-free kit only.
– "Connect media player" / "Disconnect
media player" : to connect / disconnect
streaming only.
– "Connect telephone + media player" /
"Disconnect telephone + media player" : to