CITROEN C3 Aircross - Settings; Frequently Asked Questions

168
Bluetooth® audio system
Interactive voice response
From the contextual menu, select "DTMF
tones" and conrm to use the digital
keypad to navigate in the interactive voice
response menu.
Conrm with OK.
Consultation call
From the contextual menu, select
"Switch" and validate to return to a call
left on hold.
Conrm with OK.
Directory
To access the directory, press and hold
SRC/TEL.
Select "Directory" to see the list of
contacts.
Conrm with OK.
To modify the contacts saved in the
system, press MENU then select
"Telephone" and conrm.
Select "Directory management" and conrm.
You can:
– "Consult an entry",
– "Delete an entry",
– "Delete all entries".
The system accesses the telephone's
contacts directory, depending on its
compatibility, and while it is connected via
Bluetooth.
With certain telephones connected by
Bluetooth you can send a contact to the
directory of the audio system.
Contacts imported in this way are saved in a
permanent directory visible to all, whatever the
telephone connected.
The menu for the directory is not accessible if it
is empty.
Voice recognition
This function allows you to use your
smartphone's voice recognition via the system.
To start voice recognition, depending on the type
of steering mounted controls:
Make a long press on the end of the lighting
control stalk.
OR
Press this button.
Voice recognition requires the use of a
compatible smartphone rst connected to
the vehicle by Bluetooth.
Frequently asked
questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
With the engine o󰀨, the audio system
switches o󰀨 after a few minutes of use.
When the engine is switched o󰀨, the audio
system operating time depends on the state of
charge of the battery.
The switch-o󰀨 is normal: the audio system
switches to economy mode and switches o󰀨 to
avoid discharging the vehicle's battery.
► Start the vehicle’s engine to increase the
charge of the battery.
The message "the audio system is
overheated" is displayed onscreen.
To protect the installation if the ambient
temperature is too high, the audio system
switches to an automatic thermal protection
mode, in which the volume may be decreased or
the CD player stopped.
► Switch the audio system o󰀨 for a few minutes
to allow the system to cool.
Radio
There is a di󰀨erence in sound quality
between the di󰀨erent audio sources (radio,
CD, etc.).
For optimal listening quality, the audio settings
(Volume, Bass, Treble, Ambience and Loudness)
can be adjusted to di󰀨erent audio sources,
resulting in audible di󰀨erences when switching
between sources (radio, CD, etc.).
► Check that the audio settings (Volume, Bass,
Treble, Ambience and Loudness) are appropriate
to the sources being listened to. We recommend
setting the audio functions (Bass, Treble, Fr-Re
www.carobook.com