40
Ease of use and comfort
► Lower the head restraints.
► If necessary, move the front seats forward.
► Pull the seats fully back (depending on
version).
► Check that no person or object will interfere
with folding down the backrests (clothing,
luggage, etc.).
► Check that the outer seat belts are properly
tensioned along the pillars, that the central belt
is stowed and that the tongues of the three belts
are correctly in the storage position.
Depending on version, the seat backrests are
equipped with a handle (bench seat with xed
cushions) or a strap (bench seat on rails).
► Operate backrest release handle 1 or pull
strap 2.
► Guide backrest 3 down to the horizontal
position.
If the backrest is equipped with a strap, it
it not necessary to guide it down.
If the backrest is equipped with a handle,
its red indicator is visible when it is
released.
Repositioning the backrests
First check that the outer seat belts are
lying vertically at alongside the backrest
latching rings.
► Put backrest 3 in the upright position and
push it rmly to latch it home.
► Check that the release handle 1 has properly
returned to its position and that the red indicator
is no longer visible (depending on version).
► Ensure that the outer seat belts are not
trapped during the operation.
Please note: an incorrectly latched
backrest compromises the safety of
passengers in the event of sudden braking or
an impact.
The contents of the boot may be thrown
forward - risk of severe injury!
Steering wheel
adjustment
► When stationary, pull the control to release
the steering wheel.
► Adjust the height and reach to suit your
driving position.
► Push the control to lock the steering wheel.
For safety reasons, these adjustments
must only be carried out with the vehicle
stationary.
To Next Page
Loading...
