228
In the event of a breakdown
B618_en_Chap08_En-cas-de-panne_ed01-2016
Putting the wheel back in place
F Put the wheel back in its housing.
F Unscrew the nut a few turns on the bolt.
F Position the fixing parts (nut and bolt) in the
middle of the wheel.
F Tighten the central nut until it clicks to
retain the wheel correctly.
F Clip the tool storage box back into place
(standard spare wheel).
If there is no wheel in the well, the fixing
parts (nut and bolt) cannot be refitted.
To Next Page
Loading...
