66
Acc ess
B618_en_Chap02_ouvertures_ed01-2016
Changing the battery
A message appears in the instrument panel screen when replacement of the battery is needed.
Version without Keyless Entry and
Starting
Battery type: CR1620 / 3 volts.
F Unclip the cover using a small screwdriver
at the cut-out.
F Lift off the cover.
F Remove the discharged battery from its
housing.
Version with Keyless Entry and
Starting
Battery type: CR2032 / 3 volts.
The remote control must be reinitialised after
replacing the battery.
For more information on reinitialising the
remote control, refer to the corresponding
section.
F Fit the new battery into its housing
observing the polarity.
F Clip the cover onto the casing.
To Next Page
Loading...
