153
Practical information
7
► Remove the protective cover from the
towball.
► Attach the trailer to the towball.
► Attach the cable on the trailer to the safety
eye 4 on the carrier.
► Insert the trailer plug and rotate it by a
quarter turn to connect it to the connection
socket 3 on the carrier.
Removing the towball
► Grasp the trailer's plug, perform a quarter
turn and pull to disconnect it from the connection
socket 3 on the carrier.
► Detach the trailer's safety cable from the
safety eye 4 on the carrier.
► Unhitch the trailer from the towball.
► Replace the protective cover over the towball.
► Lift the cap to access the lock.
► Insert the key into the lock 7.
► Open the lock using the key.
► Hold the towball 5 rmly in one hand; using
the other hand, pull and turn the wheel 6 fully in
a clockwise direction until it stops; do not release
the wheel.
► Extract the towball from the base of its
carrier 1.
► Release the wheel; it automatically locks
in the unlocked position and the red mark on
the wheel is in line with the white mark on the
towball (position B).
To Next Page
Loading...
