CITROEN C5 X 2021 - Page 189

187
MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS
10
necessary for each valid connected service
available.
Personal data required for connected
service use are sent to services
providers.
"Share Data"
This mode allows the vehicle to transmit
outside the vehicle all the data necessary for
each valid connected service available, with the
exception of vehicule position data (e.g. GPS
coordinates).
Some connected services may not be
able to function without vehicule position
data.
"Private Mode"
This mode does not allow the vehicle to
transmit personal data outside the vehicle.
Connected services will only perform
local processing inside the vehicle with
limited functions.
This mode won't be applied on regulation
functions (emergency or assistance call)
or specic services with given user's consent
on business contracts (Connected alarm).
When the vehicule is in professional use or
in use under specic contracts subscribed
(connect eet, public delegation…), some
privacy modes won't be available to the user
depending on services data sharing needs.
To change the mode, swipe down from the upper
edge of the touch screen, to display all the quick
settings.
Press this button and select the chosen
mode. The mode is highlighted.
OR
Press the "Settings" application.
In the list, select the "Connectivity" tab.
Select "Privacy Settings".
Choose the mode.
Internet portal
During the rst use, upon acquisition of the
vehicle, the user is invited to select the country
of residence for the use of the Internet portal.
If the country is not selected, the notication is
stored in the notication centre and disappears
once the country is selected. Slide a nger on
the touch screen from top to bottom to display all
the notications.
The selection of a country is necessary to use
the available internet applications.
Press the "Settings" application.
In the list, select the "Connected Services” tab.
Choose the country.
The rst time you use it, via a connected
mobile device, the system links to your
prole. The connected mobile device serves as
an access key to saved personal information.
First activate the mobile device’s Bluetooth
®
function.
Select the desired application, authentication will
be requested if necessary. This authentication
will be saved for future uses via the mobile
device connected to the current prole.
An authentication will be requested at each use if
the mobile device is not connected to the current
prole or if the Guest prole is used.
With the use of the “Guest” prole, an
identication will be requested for each
use.
Updating the system
Remote device management and
remote software and rmware updates
As an integral part of the service related
to the performance of connected service
contract(s), necessary device management
and necessary software and rmware
updates related to the soft- and rmware
for the named connected service will be
performed remotely, in particular by using
"Over the Air"-technology.
For this, a secure radio network connection
between the vehicle and the device
management server of the Manufacturer will
be established after each "ignition on" when
a cellular network is available. Depending
on the equipment of the vehicle, connection
conguration must be set to "Connected