48
Ease of use and comfort
First steps:
► Lower the head restraints.
► If necessary, move the front seats forward.
► Check that no person or object might interfere
with the folding of the backrests (e.g. clothing,
luggage).
► Check that the seat belts are free, not
engaged in the buckles. Release them so that
the backrest can be moved.
Folding from the passenger compartment
► Press the backrest release grip 1.
► Guide the backrest 2 down to the horizontal
position.
When the backrest is released, the red
indicator in the release grip is visible.
Folding from the boot (depending on
version)
► Pull the backrest release lever 3 towards you.
The backrest 2 folds fully onto the cushion.
Repositioning the backrests
First check that the outer seat belts are
lying vertically at alongside the backrest
latching rings.
► Put the backrest 2 in the upright position and
push it rmly to latch it home.
► Check that the red indicator is no longer
visible in the release grip 1.
► Ensure that the outer seat belts were not
trapped during the operation.
Please note: an incorrectly latched
backrest compromises the safety of
passengers in the event of sudden braking or
an accident.
The contents of the boot may be thrown
forwards - risk of serious injury!
Courtesy buttons
These buttons are used to move the passenger
seat forward from the rear bench seat or to
adjust the angle of the backrest.
► Press the front or rear of the button 1 to move
the passenger seat forwards or backwards until
the desired position.
To Next Page
Loading...
