CITROEN C5 X 2021 - Page 65

63
Lighting and visibility
4
Headlamp beam height
adjustment
To avoid dazzling other road users, the height
of the headlamp beams must be adjusted
according to the load in the vehicle.
0 (Initial setting)
Driver only or driver + front passenger
1 5 people
2 5 people + load in the boot
3 Driver only + load in the boot
4 5 6 Not used
Automatic illumination of
lamps
With the lighting control stalk in the “AUTO”
position and if a low level of exterior brightness
is detected by the rain/sunshine sensor, the
sidelamps and dipped beam headlamps are
switched on automatically, without any action on
the part of the driver. They may also come on if
rain is detected, at the same time as automatic
operation of the windscreen wipers.
As soon as the brightness returns to a su󰀩cient
level or after the windscreen wipers are switched
o󰀨, the lamps are switched o󰀨 automatically.
Malfunction
In the event of a malfunction of the rain/
sunshine sensor, the vehicle’s lamps
come on and this warning lamp is displayed on
the instrument panel, accompanied by an
audible signal and/or the display of a message.
Have it checked by a CITROËN dealer or a
qualied workshop.
Do not cover the rain/sunshine sensor
located at the top centre of the
windscreen behind the interior rear view
mirror; the associated functions would no
longer be controlled.
In fog or snow, the rain/sunshine sensor
may detect su󰀩cient light. For this
reason, the lighting will not come on
automatically.
The inner surface of the windscreen may
become misted up and a󰀨ect the proper
operation of the rain/sunshine sensor.
In humid and cold weather, demist the
windscreen regularly.
Guide-me-home and
welcome lighting
Guide-me-home lighting
Automatic
With the ring of the lighting control stalk in the
"AUTO” position and when the light is poor, the
dipped beam headlamps come on automatically
when the ignition is switched o󰀨.
You can activate/deactivate and adjust
the duration of the guide-me-home
lighting in the Settings > Vehicle touch screen
application.
Manual
► With the ignition o󰀨, pull the lighting control
stalk towards you ("headlamp ash") to activate/
deactivate the function.
Manual guide-me-home lighting goes o󰀨
automatically after a period of time.
Welcome lighting
This system automatically switches on: