.
Audio and Telematics
279
C5_en_Chap11b_SMEGplus_ed01-2015
Select a radio station or frequency (refer to the
corresponding section).
Press on Radio Media to display the
primary page.
Press on the secondary page.
Select "Settings".
Select "Radio".
Activate/deactivate "RDS
options".
Press on Radio Media to display the
primary page.
Press on the secondary page.
Press on "Preset".
Select a number in the list to preset the
previously chosen radio station.
A long press on a number presets (memorises)
the station.
Press on Frequency.
Enter the frequency in full (e.g.:
92.10 MHz) using the keypad then
"Confirm".
Changing radio station
Pressing the name of the current radio station
brings up a list.
To change radio station press the name of the
desired station.
Or
Press on Radio Media to display the
primary page.
Select "Save".
Preset a station Activate/ Deactivate RDS
OR
THEN
A press on this button presets all of
the stations one after the other.
Recall pre-set stations
RDS, if activated, allows you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the entire country as
radio stations do not cover 100 % of
the territory. This explains the loss of
reception of the station during a journey.
To Next Page
Loading...
