Ease of use and comfort
66
C5_en_Chap03_ergo-et-confort_ed01-2015
Head restraint height and angle
adjustments
(electric seats)
F To adjust the angle of the head restraint,
push back or pull forward section B of the
head restraint until you reach the desired
position.
F To raise it, pull upwards.
F To lower it, press on the control C to
release it, and simultaneously on the head
restraint itself.
F To remove it, press on the control C to
release it, then pull it upwards.
Heated seats control
With the engine running, the front seats can
operate separately.
F Use the corresponding adjustment dial,
placed on the outer side of each front seat,
to switch on and select the level of heating
required:
0: Off.
1: Low.
2: Medium.
3: High.
This function provides the driver with a back
massage. It only operates when the engine is
running.
F Press on button A.
The warning lamp comes on and the massage
function is activated for a period of 1 hour.
During this time, massage is performed in
cycles of 6 minutes (4 minutes of massage
followed by 2 minutes break). In total, the
system will perform 10 cycles.
After 1 hour, the function is deactivated.
The warning lamp goes out.
Massage function
Deactivation
You can deactivate the massage function at
any time by pressing on button A.
To Next Page
Loading...
