8
Practical information
3
Repair procedure
1. Sealing
) Switch off the ignition.
) Turn the selector A to the
"sealant" position.
) Check that the switch B is in
position "O" .
Avoid removing any foreign bodies
which have penetrated into the tyre.
) Uncoil the white pipe G fully.
) Unscrew the cap from the white pipe.
) Connect the white pipe to the valve of the
tyre to be repaired.
Take care, this product is harmful
(e.g. ethylene-glycol, colophony...) if
swallowed and causes irritation to the
eyes.
Keep this product out of the reach of
children.
) Connect the compressor's electric plug to
the vehicle's 12 V socket.
) Start the vehicle and leave the engine
running.
Do not start the compressor before
connecting the white pipe to the tyre
valve: the sealant product would be
expelled through the pipe.
To Next Page
Loading...
