34
Alarms
System User Guide - 03.12.14
4. APPENDIX
Alarm Conditions
Throt_Learning Etat_Appr ≥ 4 AND Road AND Power ON AND Rpm = 0 AND Speed = 0
Throt_Ped_Learning_Max Etat_Appr ≥ 3 AND Road AND Power ON AND Rpm = 0 AND Speed = 0
Throt_Ped_Learning_Min Etat_Appr ≥ 2 AND Road AND Power ON AND Rpm = 0 AND Speed = 0
High_Hydr_P
P_Accu ≥ 5 AND Road AND Power ON AND Rpm = 0 AND Speed = 0
Start_S1
Thrtl ≤ 50 AND S1 AND Stage AND Speed = 0 AND Power ON AND Rpm > 0
Start_S2 Thrtl ≤ 50 AND S2 AND Stage AND Speed = 0 AND Power ON AND Rpm > 0
GO_S1 P2P ≥ 1500 AND S1 AND Stage AND Speed = 0 AND Power ON AND Rpm > 0
GO_S2 P2P ≥ 1700 AND S2 AND Stage AND Speed = 0 AND Power ON AND Rpm > 0
Wat_Temp
Teau ≥ 110
Wat_P P_EAU ≤ 1.2 AND Teau ≥ 50 AND Rpm > 2500
Oil_P Poil ≤ 2 AND Rpm > 300
Hydr_P P_Accu ≤ 30 AND Power ON
Turbo_Temp_R3Max
T4 ≥ 550 AND Road AND Speed = 0
HighCurrent_Off RxBufDiag2BRK0 ≥ 1 AND Road
LowCurrent_Off RxBufDiag1BRK0 ≥ 1 AND Road
Vbatt DDU_Vbatt ≤ 11.5 AND Rpm > 0
Gbox_Temp T_BV ≥ 130
HydPump RxBufDiag2BRK0 = 3
Turbo_P P2P ≥ 2800 AND Thrtl > 65
Park P_Frein_A_M ≥ 30 AND P_FreinAR ≤ 5 AND Road AND Power ON AND Speed = 0 AND Rpm > 0
Fuel_P PEss_HP ≤ 20 OR PEss_HP ≥ 160 AND Power ON AND Rpm > 0
Smot BRK_SW = 25 AND Power ON
To Previous Page
Loading...
Need help?
General
