CITROEN DS3 - Page 40

Service indicator zero reset
Aftereachservice,theserviceindicatormust
beresettozero.
Theprocedureforresettingtozeroisas
follows:
F switchofftheignition,
F pressandholdthetripdistancerecorder
zero reset button,
F switchontheignition;thedistancerecorder
displaybeginsacountdown,
F whenthedisplayindicates"=0", release
thebutton;thespannerdisappears.
Followingthisoperation,ifyouwishto
disconnectthebattery,lockthevehicle
andwaitatleastfiveminutesforthe
zeroresettobetakenintoaccount.
Retrieving the service
information
Youcanaccesstheserviceinformationatany
time.
F Pressthetripdistancerecorderzeroreset
button.
 Theserviceinformationisdisplayedfora
fewseconds,thendisappears.